Powders may settle or become dense sitting overtime & can create uneven dipping results. For seamless dipping, loosen powders by shaking jars while closed or stir with a clean utensil prior to use.

Step 1:

Wash and dry hands, push back cuticles, buff nail, wipe with alcohol then apply your primer.

Step 2:

Apply a thin coat of the base coat on the entire nail surface, avoid getting on cuticles.

Step 3: 

Dip nail into powder and tap finger gently to remove excess. 

Step 4:

Gently brush off excess powder without pressing on the nail.

Step 5:

Repeat STEP 2

We recommend 3-4 dips. This will be files and buffed back in step 9.

Step 6:

Repeat STEP 3

Step 7: 

Repeat STEP 4

Step 8: 

Apply Activator and ALLOW NAILS TO DRY before filing, shaping and smoothing the entire nail. 

Note: Very gently apply the activator on to your nail, coating everywhere, don’t apply any pressure as you may indent the powder.

Step 9:

Shape and buff your entire nail. Apply a second coat of activator, then WASH AND DRY HANDS.

Apply one more coat of activator after you have finished buffing. Wash your hands in water only, dry thoroughly.

Step 10:

Apply two coats of top coat, first sparingly and quickly. The second coat slower and thicker.